Ricoh 5510L - Scanner Switches

14 June, 2002 BIT SWITCHES
5-39
Service
Tables
5.2.2 SCANNER SWITCHES
Scanner Switch 00
No FUNCTION COMMENTS
0 MTF
0: Disabled 1: Enabled
1 Text/Photo separation in
halftone mode
0: Disabled 1: Enabled
Normally keep this bit at 1 to get a good halftone
quality.
2-3 Maximum transmittable
document length
Bit 3 2 Setting
0 0 600 mm
0 1 1200 mm
1 0 Not used
1 1 Not used
If the user wants to send very long documents
such as well logs, select the higher setting.
4 OR processing in immediate
TX and copying (Standard
resolution)
0: Disabled
1: Enabled
0: The machine scans the document in 3.85
line/mm steps, then transmits or makes copies.
1: The machine scans the document in 7.7
line/mm steps. Each pair of lines goes through OR
processing before transmission or copy making.
Toner may be used up earlier if OR processing is
enabled.
5 Not used Do not change these settings.
6 OR processing in Memory TX
(Standard resolution)
0: Disabled
1: Enabled
7 Not used Do not change these settings.
Scanner Switch 01 - Not used (do not change any of these settings)
Scanner Switch 02 - Not used (do not change any of these settings)
Scanner Switch 03 - Not used (do not change any of these settings)
Scanner Switch 04 - Not used (do not change any of these settings)
Scanner Switch 05 - Not used (do not change any of these settings)
Scanner Switch 06 - Not used (do not change any of these settings)
Scanner Switch 07 - Not used (do not change any of these settings)
Scanner Switch 08 - Not used (do not change any of these settings)
Scanner Switch 09 - Not used (do not change any of these settings)
Scanner Switch 0A - Not used (do not change any of these settings)
Scanner Switch 0B - Not used (do not change any of these settings)
Scanner Switch 0C - Not used (do not change any of these settings)
Scanner Switch 0D - Not used (do not change any of these settings)
Scanner Switch 0E - Not used (do not change any of these settings)
Scanner Switch 0F - Not used (do not change any of these settings)