BIT SWITCHES 14 June, 2002
5-38
System Switch 19
0-1 Not used Do not change the settings.
3 Handling LAN Fax Prefixed with #
0: Recognizes the #-prefixed number
as a Quick Dial, Speed Dial, or
Group Dial code.
1: Uses the #-prefixed number to
access another line through a
switching device.
This setting avoids problems with a
system that recognizes the # symbol as a
code to access a switching device.
0 (Off)
Recognizes the # number as a normally
registered destination and sends. If the
number is not registered, nothing
happens.
1 (On)
Recognizes the # as the code to access
another line via a switching device.
However, if the input number is registered
as a Quick Dial, Speed Dial, or Group Dial
number, the machine sends the message
to that number. If there is no match with a
registered destination, or if the specified
number code does not match the format
for a Quick, Speed, or Group dial code,
the machine dials the specified number.
4-7 Not used Do not change the settings.
System Switch 1A
No FUNCTION COMMENTS
0 Simultaneous broadcasting
0: Disabled
1: Enabled
This determines whether broadcasting is
done by sending to each station
consecutively, or simultaneously using
more than one outgoing line (up to two
outgoing lines can be used
simultaneously).
1-7 Not used Do not change the settings
System Switch 1B - Not used (do not change any of these settings)
System Switch 1C - Not used (do not change any of these settings)
System Switch 1D - Not used (do not change any of these settings)
System Switch 1E - Not used (do not change any of these settings)
System Switch 1F - Not used (do not change any of these settings)
To Next Page
Loading...
