Ricoh 5510L - G3 Interface Unit Type510

INSTALLING OPTIONAL UNITS 14 June, 2002
1-12
1.3.4 G3 INTERFACE UNIT TYPE510
1. Remove the upper cover [A] (2 screws).
2. Remove the rear cover (7 screws) [B] and cut
away the LINE2 small cover as shown.
3. Remove the bracket cover [C] (4 screws) as
shown.
H209I006.WMF
H209I013.WMF
H209I523.WMF
[C]
[A]
[B]