COMPONENT LAYOUT 14 June, 2002
Spec-12
1.3.3 DRIVE LAYOUT
Components
No Name Description
1 Main Motor
This stepper motor drives the AIO cartridge and the
fusing unit.
2 Fusing Unit This fuses the toner to the paper.
3 All-in-One Cartridge
Consists of the toner cartridge, cleaning unit, used toner
tank, charge brush roller, development roller, and OPC
drum.
4 Paper Feed Roller Feeds the paper towards the registration roller.
5 Paper Pick-up Roller
Picks up the top sheet of paper from the stack in the tray,
and feeds it into the printer.
6 Paper Feed Motor
This stepper motor drives the registration roller and the
paper feed mechanisms in the main body and the
bypass tray.
7 Registration Roller Carries out the registration process.
H310V006.WMF
1
2
3
4
5
6
7