Ricoh 5510L - Replacing the Paper Near End Sensor; Replacing the Upper Limit and Paper End Sensors

14 June, 2002 SENSORS
3-23
Replacement
Adjustment
3.6.3 REPLACING THE PAPER NEAR END SENSOR
1. Remove the paper feed tray (! x 2).
2. Remove the guide plate (! x 2)
3. Remove the paper near end sensor [A] (" x 1)
3.6.4 REPLACING THE UPPER LIMIT AND PAPER END SENSORS
1. Remove the paper feed tray (! x 2).
2. Remove the connectors attached to the upper limit sensor [A] and paper end
sensor [B].
3. Remove the screw that holds the sensor bracket [C] in place, and remove the
bracket by pulling downward.
4. Remove the sensors from the bracket.
H310R915.WMF
H310R914.WMF
[A]
[A]
[B]
[C]