Ricoh 5510L - Replacement and Adjustment; External Covers; Removing the Adf Front and Rear Covers; Removing the Upper Guide Plate

14 June, 2002 EXTERNAL COVERS
3-1
Replacement
Adjustment
3. REPLACEMENT AND ADJUSTMENT
3.1 EXTERNAL COVERS
3.1.1 REMOVING THE ADF FRONT AND REAR COVERS
1. Open the ADF upper cover [A].
2. Remove the ADF front cover [B] (! x 2).
3. Remove the pick-up roller unit [C] by sliding the unit toward the back (toward
the spring-loaded end).
4. Remove the ADF rear cover [D] (! x 1).
3.1.2 REMOVING THE UPPER GUIDE PLATE
1. Remove the upper guide plate [A] (! x 4).
H310R001.WMF
H310R002.WMF
[A]
[B]
[C]
[D]
[A]