Ricoh 5510L - Replacing the R0 Roller

ADF/SCANNER SECTIONS 14 June, 2002
3-6
3.2.4 REPLACING THE R0 ROLLER
1. Remove the ADF rear cover (☛ 3.1.1).
2. Remove the ADF front cover (☛ 3.1.1).
3. Remove the upper guide plate [A] (! x 4).
4. Remove the belt tension roller with spring plate [B] (! x 1).
5. Remove the belt [C].
6. Release the pawl that holds the pulley [D], and remove the pulley.
7. Slide the R0 roller [E] toward the rear and lift the roller out.
H310R002.WMF
H310R950.WMF
[A]
[B]
[C]
[D]
[E]