Ricoh 5510L - Jpeg Test (Function 21); Ip-Fax Ipg3 Bit Switches (Function 22); Ip-Fax Port Setting (Function 22)

SERVICE LEVEL FUNCTIONS 14 June, 2002
5-20
5.1.43 JPEG TEST (FUNCTION 21)
1. Enter the Service Mode.
2.
' $
3. !
4. If the test is completed without error, "OK!! " will be displayed.
If there was an error, "NG!! " will be displayed.
5.1.44 IP-FAX IPG3 BIT SWITCHES (FUNCTION 22)
1. Enter the Service Mode.
2.
' '
3. %
4. Scroll through the bit switches using
"
or
! and adjust the switches as
needed.
5.1.45 IP-FAX PORT SETTING (FUNCTION 22)
1. Enter the Service Mode.
2.
' '
3. $
4. CTRL PORT: 0
DATA PORT: 1
RAS PORT: 2
GK PORT: 3
These four items are set to industry standard settings by default. They have been
tested with common office network environments and should not need changing.
)
H310S550.BMP
)
H310S551.BMP
)
H310S552.BMP
)
H310S551.BMP
H310S553.BMP