BIT SWITCHES 14 June, 2002
5-42
Printer Switches 04 and 05
No FUNCTION COMMENTS
0-7 Reduction ratios used for different paper sizes (with reduction enabled in switch 03-bit
0 above)
If reduction is enabled, the data will be reduced in the lengthwise direction before
printing.
These switches determine the maximum reduction ratio for each paper size.
Switch 04/05 Paper used
Bit 0 A5 sideways
Bit 1 LT sideways
Bit 2 LT
Bit 3 A4
Bit 4 F, F4
Bit 5 LG
Bit 6 Not used
Bit 7 DTL
SW04 SW05 Reduction Ratio
1 0 4/3 (When 600dpi is selected, cannot be applied for DLT)
0 1 8/7 (When 600dpi is selected, cannot be applied for DLT)
1 0 12/11
Printer Switch 06 - Not used (do not change any of these settings)
Printer Switch 07 - Not used (do not change any of these settings)
Printer Switch 08 - Not used (do not change any of these settings)
Printer Switch 09 - Not used (do not change any of these settings)
Printer Switch 0A - Not used (do not change any of these settings)
Printer Switch 0B - Not used (do not change any of these settings)
Printer Switch 0C - Not used (do not change any of these settings)
Printer Switch 0D - Not used (do not change any of these settings)
Printer Switch 0E - Not used (do not change any of these settings)
Printer Switch 0F - Not used (do not change any of these settings)
To Next Page
Loading...
