BIT SWITCHES 14 June, 2002
5-66
G3-2 Switch 0C
FUNCTION COMMENTS
0
1
Pulse dialing method
Bit 1 Bit 0 Setting
0 0 Normal (P=N)
0 1 Oslo (P=10 - N)
1 0 Sweden (N+1)
1 1 Not used
P = Number of pulses sent out, N = Number
dialed.
2-6 Not used Do not change these settings.
7 FOD feature using PSTN-2
(optional SG3)
0: Enabled
1: Disabled
1: FOD will not be available on the PSTN-2 line.
G3-2 Switch 0D - Not used (do not change these settings)
G3-2 Switch 0E - Not used (do not change these settings)
G3-2 Switch 0F - Not used (do not change these settings)
To Next Page
Loading...
