14 June, 2002 SERVICE RAM ADDRESSES
5-97
Service
Tables
400103(H) – User parameter switch 19 (SWusr_13)
Bits 0 to 2: Paper tray used for printing reports
Bit 2 1 0 Setting
0 0 0 Disabled
0 0 1 Tray 1
0 1 0 Tray 2
0 1 1 Tray 3
1 0 0 Tray 4
1 0 1 Tray 5
1 1 1 Bypass tray
Bits 3 and 4: Not used
Bits 5 to 7: Paper tray used for copy mode
Bit 7 6 5 Setting
0 0 0 Not used
0 0 1 Tray 1
0 1 0 Tray 2
0 1 1 Tray 3
1 0 0 Tray 4
1 0 1 Tray 5
1 1 1 Bypass tray
400104(H) – User parameter switch 20 (SWusr_14)
Bit 0: Not used
Bit 1: Ex. Super fine mode in copy mode 0: Off, 1: On
Bit 2: Ex. Super fine mode in transmission 0: Off, 1: On
Bit 3: Ex. Super fine mode in reception 0: Off, 1: On
Bit 4: Vertical Blank Line Correction 0: Off, 1: On
Bit 5: Use name of the Personal Box as the fax header 0: Off, 1: On
Bit 6: Not used
Bit 7:Scanner Cleaning Message 0: Off, 1: On
400105(H) – User parameter switch 21 (SWusr_15)
Bit 0: On Hook Line selection 0: PSTN, 1: ISDN
Bits 2 to 7: Not used
400106(H) – User parameter switch 22 (SWusr_16)
Bits 0 to 7: Not used
400107(H) – User parameter switch 23 (SWusr_17)
Bits 0 to 7: Not used
400108(H) – User parameter switch 24 (SWusr_18)
Bits 0 to 7: Not used
To Next Page
Loading...
