ADF/SCANNER SECTIONS 14 June, 2002
3-8
7. Remove the white plate [D]. This is done by first sliding the plate toward the
front of the machine, then releasing and removing the rear pawl.
8. Remove the screw [E] that fastens the grounding strip.
9. Remove the guide plate [F] (! x 5).
10. Remove the gears [G], [H], [I], and [J] (first remove the gear pawls).
11. Remove the clips and bushings, followed by the R1 [K] and R2 [L] rollers, and
the exit roller [M].
H310R029.WMF
H310R953.WMF
[G]
[H]
[I]
[J]
[K]
[L]
[M]
[D]
[E]
[F]
To Next Page
Loading...
