Ricoh Aficio MP C2550 Service Manual

Error Codes
SM 17 D432/D433
D432/D433
Fax Option
Type
C2550/C2530
Code Meaning Suggested Cause/Action
 Try adjusting the tx level and/or cable
equalizer settings.
 The other end may have a defective
modem/FCU; try sending to another machine.
 Check for line problems and noise.
Cross reference
 Tx level - NCU Parameter 01 (PSTN)
 Cable equalizer - G3 Switch 07 (PSTN)
 Dedicated Tx parameters in Service Program
Mode
0-14
Non-standard post
message response code
received
 Incompatible or defective remote terminal; try
sending to another machine.
 Noisy line: resend.
 Try adjusting the tx level and/or cable
equalizer settings.
 Replace the FCU.
Cross reference
See error code 0-08.
0-15
The other terminal is not
capable of specific
functions.
The other terminal is not capable of accepting the
following functions, or the other terminal’s memory
is full.
 Confidential rx
 Transfer function
 SEP/SUB/PWD/SID
0-16
CFR or FTT not detected
after modem training in
confidential or transfer
mode
 Check the line connection.
 Replace the FCU.
 Try adjusting the tx level and/or cable
equalizer settings.
 The other end may have disconnected, or it
may be defective; try calling another machine.
 If the rx signal level is too low, there may be a
line problem.

Ricoh Aficio MP C2550 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Color)	25 ppm
Print Speed (Monochrome)	25 ppm
Print Resolution	600 x 600 dpi
Maximum Print Resolution	2400 x 600 dpi
Duplex Printing	Yes
Copy Speed (Color)	25 cpm
Copy Speed (Monochrome)	25 cpm
Copy Resolution	600 x 600 dpi
Memory (Maximum)	1 GB
Hard Disk Drive (Optional)	80 GB
Interface	USB 2.0, Ethernet 10/100Base-TX
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Scan Resolution	600 dpi
Zoom Range	25% - 400%
Paper Size	A4, A5, B5
Paper Weight	52 - 256 g/m²
PDL	PCL 6, PostScript 3
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac OS