Ricoh Aficio MP C2550 Service Manual

SC Tables
D037/D038/D040/D041 4-50 SM Appendix
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
1. Turn the main switch off and on.
2. Reinstall the controller system firmware.
3. Replace the controller.
When the problem cannot be fixed with the above procedure, the
following information displayed on the screen needs to be fed back to a
technical support center.
 SC code
 Detailed error code
 Program address
CPU/Memory Error
 System firmware problem
 Defective RAM-DIMM
 Defective controller
[0702]
[0709]
[070A]
1. Reinstall the controller system software.
2. Replace the RAM-DIMM.
3. Replace the controller.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
821
CTL
D
Self-diagnostics error: ASIC
[XXXX]: Detailed error code
ASIC error
The write-&-verify check error has occurred in the ASIC.
 Defective ASIC device
[0B00]
Replace the controller.
ASIC detection error
The I/O ASIC for system control is not detected.
[0B06]
 Defective ASIC
 Defective North Bridge and PCI I/F

Ricoh Aficio MP C2550 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Color)	25 ppm
Print Speed (Monochrome)	25 ppm
Print Resolution	600 x 600 dpi
Maximum Print Resolution	2400 x 600 dpi
Duplex Printing	Yes
Copy Speed (Color)	25 cpm
Copy Speed (Monochrome)	25 cpm
Copy Resolution	600 x 600 dpi
Memory (Maximum)	1 GB
Hard Disk Drive (Optional)	80 GB
Interface	USB 2.0, Ethernet 10/100Base-TX
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Scan Resolution	600 dpi
Zoom Range	25% - 400%
Paper Size	A4, A5, B5
Paper Weight	52 - 256 g/m²
PDL	PCL 6, PostScript 3
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac OS