Fixed USB Port
Off: Fixed USB Port
The PC will not recognize another machine of the same model as
a new device. This prevents the PC's Plug-and-Play function from
starting up, and allows the current printer driver to be used
without reinstallation.
On: Not Fixed USB Port (Default)
Print Cartridge
This is the progress bar for toner remaining in the AIO.
• If Toner End Option (see below) is on ("Stop Printing") this
progress bar is also displayed on the initial screen of the
SOM.
•
If Toner End Option is off ("Continue Printing") the progress
bar is blank with two asterisks to the right here (and on the
initial screen of the SOM).
Low Humidity Mode
Off (default)/On
Black lines a few millimeters thick may appear in prints when the
machine operates in a low humidity environment. Switching this
feature on may eliminate these lines.
Registration
This is image registration. It determines how the image is
projected onto the drum and then onto the paper.
• Horizontal. [0 to 15/0/0.1 mm steps]
• Vertical. [0 to 15/0/0.1 mm steps]
Adjust Image Density
Adjusts the overall image density. Three settings (reflected in the
progress bar) are available.
Lighter, Normal (Default), Darker
6. Troubleshooting
180
To Next Page
Loading...
