M102 Configuration
1 Operation Panel
Holds the keys and 2-digit display for printer operation.
2 Platen
Covers the exposure glass.
3 Paper Tray
Holds 50 sheets of paper for continuous feed.
4 Exposure Glass
Place sheets here, one by one for copying.
5 Paper Tray Cover
Raise to extend the paper tray, and lower after pushing the paper tray down into the machine.
6 Output Tray Extension
Pull out and extend to hold paper as it exits the machine.
7 Output Tray
Holds paper as it exits the printer. Folds up against the machine when it is not being used..
8 Flatbed Scanner
Scans the original on the exposure glass. Also raises and lowers for installation of the AIO and paper
jam removal.
9 USB Port
Connection point for connection to a computer with a USB cable.
10 Power Switch
Cycles the machine power on/off.
1. Product Information
26
To Next Page
Loading...
