Combine
Combines document pages on paper.
• Off. (Default) 1 document page prints per 1 side of a sheet
of paper.
• 2on1. 2 document pages print per 1 side of a sheet of
paper. Portrait (Default) or Landscape can be selected.
• 4on1. 4 document pages print per 1 side of a sheet of
paper. The operator can also select Portrait: L to R, Portrait: T
to B, Landscape: L to R, Landscape: R to L.
2 Sided Copy
Allows the operator to set up printing on both sides of the paper.
• Off. (Default)
• Top to Top. The operator can also select Portrait (default) or
Landscape.
• T
op to Bottom. The operator can also select Portrait (default)
or Landscape.
Toner Saving
This setting conserves toner when printing copies.
• Off. (Default)
• On. Printing copies consumes less toner.
Fax Features These features set up fax communication, sending, and receiving.
TX Settings Immediate TX
Determines whether the original is scanned into memory or sent
directly over the line.
• Off (Default). The original is scanned into memory and
queued for sending.
• On. The original is scanned and sent immediately (not
scanned into memory).
• New Fax Only. Sends next fax transmission by Immediate
TX, and then resets automatically to "Off".
Resolution
Utilities
183