First print • Less than 6.4 s from the start of paper feed until
paper exits.
•
Less than 13 s from the time data is received until
paper exits.
Printing resolution 600 x 600 dpi or 1200 x 600 dpi (selected with the
printer driver)
Warm-up time (Ready status) 25 sec. (power on, energy save recovery)
at 23°C (71.6°F)
Paper Path Driver Single brush-less DC motor
AIO (All In One system*
1
) Replaceable cartridge
Drum Optical photo-conductor
Development Dry electro-static method
Charge Charge roller
Toner supply Auger agitation, supply
Used toner collection Used toner collection container
Cleaning Opposable cleaning blade
Estimated yield Based on A4 SEF Test Pattern
Starter AIO 500 sheets
Replacement AIO ID chip model: 1200 sheets
Non-ID chip model: 2000
sheets
ID chip See “Names and Distribution” in this section.
Storage conditions
Temperature -30°C to 40°C
(-54°F to 104°F
Humidity 15% to 80% rH
Note: Store away from direct sunlight.
*
1
The AIO cartridge contains the drum, charge unit, development unit, cleaning unit, and toner
supply unit. The unit is replaced as a whole; there are no serviceable parts inside.
Machine Specifications
5
To Next Page
Loading...
