1. To start Fax Maintenance (M103 Only)
1. Make sure the machine is in the Ready mode.
2.
Press [Stop/Reset] and then press [1] > [0] > [7].
3. Press and hold down [Start[.
2. To start Fax Test (M103 Only)
1. Switch the machine on.
2. With the machine in Ready mode, press [Copy/Fax].
3. Engine Maintenance, Counter Information, Error History
Items 3, 4, and 5 in the table above are on the Service Mode screen of the Smart Organizing Monitor..
1. Open Smart Organizing Monitor.
2. Enter the service mode to display the Service Mode screen.
There are other important features in the Smart Organizing Monitor that are used during servicing:
• Printing a Test Page
• Firmware update
• Releasing the machine after a fatal fusing error
• Resetting the machine after correcting a fatal fusing error
More details about these utilities are available in another section of this service manual. (
p.159
"Utilities")
• The M103 has a User Tools key that opens the User Tools menus.,
• Many items in these menus duplicate the tasks that can be performed with the Smart Organizing
Monitor.
•
Please remember that these User Tools menus are available with the M103 only. (The M101,
M102) do not have a User Tools key on their operation panels.
4. Replacement and Adjustments
76
To Next Page
Loading...
