Replacing the Photo Conductor Unit
111
6
E Pull out the ring pull handle of the photo conductor unit.
F Hook your finger through the ring pull handle, and then slowly pull out
the photo conductor unit. When you have pulled the unit half way out, sup-
port the photo conductor unit using your other hand, and then pull the unit
completely out.
• Do not hold any protruding areas of the photo conductor unit. Doing so
may break the photo conductor unit.
• Do not touch any protruding areas of the photo conductor unit. These may
stain your hands or clothes.
G Remove the new photo conductor unit from its box.
For black, install one; for color, install all three.
AET139S
AET140S
AET141S
To Next Page
Loading...
