Ricoh C2000 User Manual

1
Acceptable total error line ratio
0: 5% 1: 10%
If the error line ratio for a page exceeds the acceptable
ratio, RTN will be sent to the other end.
2
Treatment of pages received with
errors during G3 reception
0: Deleted from memory without
printing
1: Printed
0: Pages received with errors are not printed.
3
Hang-up decision when a negative
code (RTN or PIN) is received
during G3 immediate transmission
0: No hang-up, 1: Hang-up
0: The next page will be sent even if RTN or PIN is received.
1: The machine will send DCN and hang up if it receives
RTN or PIN.
This bit is ignored for memory transmissions or if ECM is
being used.
4-7 Not used Do not change the settings.
Communication Switch 03 [SP No. 1-104-004]
No FUNCTION COMMENTS
0-7
Maximum number of page
retransmissions in a G3 memory
transmission
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 [SP No. 1-104-010]
No FUNCTION COMMENTS
0-7 I-Fax dial interval setting
Adjusts the interval of the I-fax dialing.
The interval of I-fax dialing is calculated by following
formula.
4. Service Tables
74
4

Ricoh C2000 Specifications

General

Category	Printer
Printing Technology	Laser
Print Speed (Black)	20 ppm
Print Speed (Color)	20 ppm
Duplex Printing	Yes
USB Connectivity	Yes