Ricoh D148 - Page 1566

Input Check Table
System Maintenance Section 3-27 D146/D147/D148/D149/D150
Input and Output
Check
017 Punch HP Sensor ENG [0 or 1 / 0 / 1/step]
018 Punch Pluse Count Sensor ENG [0 or 1 / 0 / 1/step]
019 Punch Chad Full Sensor ENG [0 or 1 / 0 / 1/step]
020 Punch Moving HP Sensor ENG [0 or 1 / 0 / 1/step]
021
Punch Registration Detection
HP Sensor
ENG [0 or 1 / 0 / 1/step]
022
Punch Registration Detection
Sensor
ENG [0 or 1 / 0 / 1/step]
6135
[INPUT Check: FrontFIN]
Gets information of specified switch. Displays signal level of switch as it is.
023 Slide Door SW ENG [0 or 1 / 0 / 1/step]
024 Shift Tray Upper Limit SW ENG [0 or 1 / 0 / 1/step]
6161
[FIN (1K FIN) INPUT Check]
Gets information of specified sensor. Displays signal level of sensor as it is.
001 Entrance Sensor ENG [0 or 1 / 0 / 1/step]
002
Upper Cover Open/Close
Sensor
ENG [0 or 1 / 0 / 1/step]
003 Proof Tray Exit Sensor ENG [0 or 1 / 0 / 1/step]
004 Proof Tray Full Sensor ENG [0 or 1 / 0 / 1/step]
005 Shift HP Sensor ENG [0 or 1 / 0 / 1/step]
006
Exit Guide Plate Open/Close
HP Sensor
ENG [0 or 1 / 0 / 1/step]
007
Shift Paper Exit (Lift Tray Exit)
Sensor
ENG [0 or 1 / 0 / 1/step]
008 Positioning Roller HP Sensor ENG [0 or 1 / 0 / 1/step]
009 Lift Tray Paper Sensor ENG [0 or 1 / 0 / 1/step]
010 Jogger HP Sensor ENG [0 or 1 / 0 / 1/step]