Mode No. Function Settings
99
Clear All
Memory
Clears all counters and returns all modes to the
default settings. See the Clear All Memory
Procedure in this section for more details.
Normally, this SP mode should not be
performed.
This SP mode is required only when replacing the
EEPROM, or when the copier malfunctions due to a
damaged EEPROM.
0: No
1: Yes
To clear, enter "1" then press the
key and the
*
key at the same time.
To avoid resetting the counter by mistake, the
counter is reset only when the
key and the
*
key are pressed at the same time.
100
By-pass Feed
Copy Counter
Display
Displays the total (electrical) copy counter for the
by-pass feed table.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
The first three digits are displayed in the
magnification indicator.
Press the
*
key to view the last three digits.
101
Paper Feed
Tray Copy
Counter
Display
Displays the total (electrical) copy counter for the
paper feed tray.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
The first three digits are displayed in the
magnification indicator.
Press the
*
key to view the last three digits.
106
DF Original
Counter
Display
Displays the total (electrical) number of originals fed
from the DF.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
The first three digits are displayed in the
magnification indicator.
Press the
*
key to view the last three digits.
130
Total Service
Calls
Displays the total number of service call conditions.
Since the copy counter for displaying the current SP
mode number has only 2 digits, the manual image
density indicator is used to display the first digit.
The first three digits are displayed in the
magnification indicator.
Press the
*
key to view the last three digits.
PROGRAM MODES 20 December 1996
4-22
To Next Page
Loading...
