2.10 4TH AND 5TH MIRROR REPLACEMENT
1. Turn off the main switch and unplug the power supply cord.
2. Remove the upper cover. (See Upper Cover Removal.)
3. Remove the lens cover [A].
NOTE:
When replacing the lens cover, be sure to:
•
Position the light shield [B] so that it is not caught by the cover, as
shown.
•
Insert the tabs [C] into the slots [D].
•
Position the harness [E] alongside the cover, as shown.
•
Position the cover pin [F] and tab [G] as shown.
[D]
[B]
[A]
[E]
[C]
[C]
[F]
[G]
A219R527.wmf
Replacement
Adjustment
20 December 1996 OPTICS
6-15
To Next Page
Loading...
