1.11 SKEWED (OPTICAL) COPY IMAGE
- Problem -
The copy image is skewed (parallelogram shape).
The sides of the copy image are straight, but the
leading and trailing edges are skewed.
(This differs from skewing originating in the paper
path.)
- Possible Causes -
1. The 4th/5th mirror assembly is not parallel with the 1st and 2nd scanners.
2. The mirrors are in the wrong position.
- Action -
Is each mirror positioned correctly on its scanner and on the 4th/5th mirror
assembly?
Yes No
Reposition the mirror correctly. If the spring plates are defective,
replace them.
Readjust the height of 4th/5th mirror assembly by turning the adjusting screw.
A219T507.wmf
Trouble-
shooting
20 December 1996 COPY QUALITY
7-13
To Next Page
Loading...
