4.8 PAPER SIZE SWITCH REPLACEMENT
1. Turn off the main switch and unplug the power supply cord.
2. Remove the front right cover. (See Front Right Cover Removal.)
3. Remove the size switch bracket [A] (1 screw).
4. Remove the size switch ass’y [B] ( 2 screws and 1 connector).
5. Remove the size switch [C] (2 tabs).
NOTE:
When reinstalling the size switch ass’y [B], make sure that the
harness [D] is inserted into the slot, as shown.
[D]
[C]
[B]
[A]
A219R550.wmf
Replacement
Adjustment
20 December 1996 PAPER FEED
6-37
To Next Page
Loading...
