Ricoh FT 4015 - Tray Feed Roller Replacement

4.2 TRAY FEED ROLLER REPLACEMENT
1. Turn off the main switch.
2. Remove the paper tray. (See Paper Tray Removal.)
3. Remove the front cover. (See Front Cover Removal.)
4. Remove the inner cover. (See Inner Cover Removal.)
5. Remove the bracket [A] and shaft (1 screw).
6. Replace the two feed rollers [B] on the shaft.
NOTE:
When reinstalling the feed roller assembly, make sure of the
following:
1) Do not touch the feed rollers with bare hands.
2) Reinstall the feed rollers face up as shown.
3) Ensure that the pin [C] on the end of the feed roller shaft fits into
the slot [D] on the end of the drive shaft.
A219R512.wmf
[B]
[D]
[A]
[C]
A219R513.wmf
PAPER FEED 20 December 1996
6-30