3.11 QUENCHING LAMP REPLACEMENT
1. Open the front cover.
2. Remove the imaging unit. (See Imaging Unit Removal.)
3. Open the rear cover. (See Rear Cover Removal.)
4. Remove the erase lamp. (See Erase Lamp Replacement.)
5. Remove the inner cover. (See Inner Cover Removal.)
6. Remove the quenching lamp [A] (1 screw and 1 connector) from the front
of the copier.
[A]
A219R540.wmf
AROUND THE DRUM 20 December 1996
6-28
To Next Page
Loading...
