10.3 BY-PASS FEED
10.3.1 Overview
The by-pass feed table [A] can hold 80 sheets of paper.
This machine does not have a by-pass feed cover sensor. The by-pass feed
indicator is always displayed on the operation panel. The Add Paper indicator
will light when the user selects by-pass feed while the by-pass feed table is
closed or if there is no paper on the by-pass feed table.
After the
key is pressed, the cpu energizes the by-pass feed clutch and
the by-pass feed roller starts to feed paper to the registration roller.
This machine does not have any sensor or switch to determine the paper
size for by-pass feed. The machine will perform a full scan for all copies.
[A]
A219D501.wmf
Detailed
Descriptions
20 December 1996 PAPER FEED AND REGISTRATION
2-43
To Next Page
Loading...
