2.2 INSTALLATION PROCEDURE
CAUTION
Do not plug in the power cord before starting the following procedure.
1. Remove all strips of tape shown above.
2. Pull out the paper tray [A], and remove the cardboard [B].
3. Open the front cover and raise the toner bottle holder lever [C].
Then pull down the securing lever [D], and remove the toner bottle holder
[E].
[B]
[A]
A219I500.wmf
[D]
[C]
[E]
A219I501.wmf
COPIER (A219) 20 December 1996
3-4
To Next Page
Loading...
