9. Install the toner bottle holder [A] in the copier as shown.
10. Shake the toner bottle [B] well.
NOTE:
Do not remove the bottle cap [C] of the toner bottle at this time.
11. Unscrew the bottle cap and insert the toner bottle into the holder, so that
the rib [D] rides the rail [E].
NOTE:
Do not open the inner bottle cap [F].
12. Reposition the holder by making sure that the securing lever [G] clicks.
Then press down the holder lever [H] to secure the bottle. Close the front
cover.
[B]
[F]
[C]
[H]
[A]
[D]
[G]
[E]
A219I504.wmf
COPIER (A219) 20 December 1996
3-6
To Next Page
Loading...
