Ricoh G133 - Fusing Fan; When Re-Installing the Idle Gear

Fusing
SM 3-83 G133
Replacement
Adjustment
5. One-way clutch gear [A] (C-ring x 1)
6. Idle gear [B]
When re-installing the idle gear
 Apply one spot of "Barrierta S552R" (the diameter of the spot must be about 3 mm in
diameter, and approximately 0.1 g in weight) to the idle gear shaft [A].
3.10.14 FUSING FAN
1. Rear cover ( "p.3-3 "Rear Cover"")
2. Right rear cover ( "p.3-3 "Right Rear Cover"")