Ricoh G133 - Service Mode Table; Controller Service Mode

Service Mode Table
SM 5-5 G133
Service
Tables
5.2 SERVICE MODE TABLE
5.2.1 CONTROLLER SERVICE MODE
1001 [Bit Switch]
1001 001 Bit Switch 1 *CTL
Adjusts bit switch settings. DFU
1001 002 Bit Switch 2 *CTL
Bit 0 to 2: Not used. Do not change the
settings.
Bit 3: Changing the print language (PCL <->
PS)
 0: Enabled
 1: Disabled (No change)
Bit 4 to 7: Not used. Do not change the
settings.
1001 003 Bit Switch 3 *CTL
Bit 0: PostScript3 Euro glyph
 0: Disabled
 1: Enabled (Even if there is no
Euro Glyph in the ROM, it is
possible to load the Euro
Glyph data.)
Bit 1: Not used. Do not change the setting.
Bit 2:PCL5e/5c (HP4000/HP8000)
The left space command is set to “0”, the
machine is changed to “1”
 0: Disabled
 1: Enabled
Bit 3: PCL5e/GL2: pen # of PW
 0: Normal
 1: Patch
Bit 4: Tray selecting
 0: Ricoh GW products (If a
tray is selected using PCL5e
commands and it has paper,