Ricoh G133 - Waste Toner Collection; From Image Transfer Belt Unit; From Pcu; Toner Collection Path and Drive

Waste Toner Collection
SM 6-37 G133
Detailed
Descriptions
6.6 WASTE TONER COLLECTION
6.6.1 TONER COLLECTION PATH AND DRIVE
From PCU
The used toner from the collection augers in the four PCUs drops into the toner collection
duct from the four openings [A][B][C][D] at the front of the PCUs. The toner collection auger
[E] in the duct transports this used toner towards the toner collection bottle [F]. The coil [E]
is driven by the toner transport motor [G]. The openings and PCUs correspond as follows:
Yellow
[A], Cyan [B], Magenta [C], Black [D].
From Image Transfer Belt Unit
The toner collection auger [A] moves the used toner from the image transfer belt and the
used toner drops into the toner collection duct [B]. The toner collection coil [C] moves the