Paper Exit
G133 6-74 SM
6.10.2 JUNCTION GATE MECHANISM
To the Standard Tray
The paper exit rollers [A] feed paper to the standard output tray. These rollers are driven by
the fusing/paper exit motor [B].
When a sheet of paper stays in the paper exit unit, the paper exit sensor [C] detects the
paper jam and a jam message is displayed.
When outputs push up the tray full actuator [D], the paper overflow sensor [E] detects that
standard output tray is full of outputs and a jam message is displayed after a job end.
To Next Page
Loading...
