Ricoh G133 - Printing the Test Page; Selecting the Panel Display Language

Printer Installation
G133 1-14 SM
3. Turn on the power switch.
 Do not turn off the power switch until initialization is completed (‘Ready’ appears
on the display when initialization is completed). Otherwise, the machine may
malfunction.
Selecting the Panel Display Language
 You can select one of these languages (the default is English): English, German,
French, Italian, Dutch, Swedish, Norwegian, Danish, Spanish, Finnish, Portuguese,
Czech, Polish or Hungarian.
 You do not have to do this procedure if you use English. Do this procedure if you
want to use a different language.
1. Turn on the power switch of the printer.
 “Ready” shows on the panel display after the machine warms up.
2. Press the "Menu" key.
 “Menu” shows on the panel display.
3. Press the "#" or "%" key to show “Language.”
4. Press the "Enter" key. “Language:” shows on the panel display.
5. Press the "#" or "%" key to get the language you want.
6. Press the "Enter" key. “Menu” shows on the panel display.
7. Press the "Menu" key. “Ready” shows on the panel display.
Printing the Test Page
1. You can check if the printer works correctly by printing a test page such as the