Fusing
G133 6-62 SM
6.9.3 IH (INDUCTION HEATING) SYSTEM
Basic IH System
When high frequency current [B] is applied to the IH coil unit, a magnetic field [C] occurs
around the IH coil [A]. This magnetic field makes eddy currents [D] and the heating roller
[E] becomes hot. (During warm up, 1250 W is applied to the IH coil unit and during paper
feed, 950 W is applied.)
Paper Size Correction
The ferrite roller [A] in the heating roller has a bronze plate [B] for paper size temperature
To Next Page
Loading...
