Service Mode Table
SM 5-241 G133
Service
Tables
6147 [FIN (JAK) OUPUT Check]
Not used in this machine.
6148 [Jogger Fine Adj]
*ENG Fine Adjust Output Jogger Unit Fences
001 A3T (SEF)
002 B4T (SEF)
003 A4T (SEF)
004 A4Y LEF)
005 B5Y (LEF)
006 A5Y (LEF)
007 DLT-T (SEF)
008 LG-T (SEF)
009 LT-T (SEF)
010 LT-Y (LEF)
011 HLT-Y (LEF)
012 Other
This SP corrects the distance between the jogger fences
and the sides of the stack when the output jogger unit
attached to the side of the machine jogs sheets as they exit
the finisher.
+ Value:
Increases distance between jogger fences and the sides of
the stack.
- Value:
Decreases the distance between the jogger fences and the
sides of the stack.
[-1.5 to 1.5 / 0 / 0.5 mm/step]
[Max. Pre-Stack Sheet]
*ENG Number of Pre-Stack Sheets
6149
This SP sets the number of sheets sent to the pre-stack tray.
Note:
You may need to adjust this setting or switch it off when feeding thick or slick
paper.
001 -
[0 to 3 / 3 / 1 sheet/step]
SP7-XXX (Data Log)
To Next Page
Loading...
Need help?
General
