Ricoh G133 - Sp5-XXX (Mode)

Service Mode Table
SM 5-199 G133
Service
Tables
3902-015: This is for the image transfer
belt cleaning unit.
SP5-XXX (Mode)
[All Indicators On]
5001
Turns all indicators on the operation panel on or off.
001 All Indicators On *CTL 0: OFF, 1: ON
[mm/inch Display Selection]
5024
Display units (mm or inch) for custom paper sizes.
001 0:mm 1:inch *CTL
0: mm (Europe/Asia)
1: inch (USA)
[Accounting Counter]
5045
Selects the counting method.
NOTE: The counting method can be changed only once, regardless of whether
the counter value is negative or positive.
001 Counter Method *CTL
[0 or 1 / 1 / - ]
0: Developments
1: Prints
[Refill Toner Detection Display]
5051
Enables or disables the toner refill detection display.
5051 1
Refill Toner Detection
Display
*CTL
[0 or 1 / 0 / - ] Alphanumeric
0: ON
1: OFF