Service Mode Table
G133 5-200 SM
[Display IP Address]
5055
Display or does not display the IP address on the LCD.
001 - *CTL
[0 or 1 / 0 / - ]
0: OFF 1: ON
[Coverage Counter Display]
5056
Display or does not Display the coverage counter on the LCD.
001 - *CTL
[0 or 1 / 0 / - ]
0: Not display, 1: Display
[A3/DLT Double Count] SSP
5104
Specifies whether the counter is double clicked for A3/DLT size prints.
When you have to change this SP, ask your supervisor.
5104 1 A3 Double Count *CTL
[0 to 2 / 0 / 1 /step]
0: NO (Normal count)
1: YES (Double count)
2: YES except By-pass (Normal count for
unknown size)
5131
[Paper Size Type
Selection]
*ENG [0: JP (Japan)/ 1: NA / 2: EU]
001
The program selects a paper size system from the following alternatives: the
AB system (0), the LT system (1), and the AF system (2).
[CE Login]
5169
If you will change the printer bit switches, you must ‘log in’ to service mode with
this SP before you go into the printer SP mode.
001 CE Login *CTL
[0 or 1 / 0 / - ]
To Next Page
Loading...
