Tray Heater (Optional Tray)
SM 1-47 G133
Installation
12. Attach the on/standby decal [K] to the right-hand side of the main power switch.
For installing the tray heater in the B801 (LCT)
1. Remove the rear cover of the mainframe ( x 6).
2. Pull out the LCT drawer.
If the right tray comes out with the left tray, push the right tray into the LCT.
3. Left tray [A] ( x 2)
4. Remove the right tray [B] while pressing down the stopper [C].
To Next Page
Loading...
