Ricoh G133 - Page 306

Jam Detection
G133 4-90 SM
Jam Code
SP
Display Description
LCD
Display
opened.
 Exit guide plate HP sensor does not
turn on after the exit guide plate has
closed.
7504 138
Finisher Staple
Moving Motor (B793)
 Staple unit HP sensor does not turn
off after the staple unit has moved
from its home position.
 Staple unit HP sensor does not turn
on after the staple unit has returned
to its home position.
R7-R11
7504 139
Finisher Punch Motor
(B793)
 Punch HP, punch movement HP or
paper position slide HP sensor does
not turn off after each unit has
moved from its home position.
 Punch HP, punch movement HP or
paper position slide HP sensor does
not turn on after each unit has
returned to its home position.
R1-R3
7504 140
Finisher Tray Lift
Motor (B793)
 Shift tray position sensor does not
turn on after the shift tray has lifted
up.
 Shift tray position sensor does not
turn off after the shift tray has lifted
down.
R1-R3
7504 141
Finisher Jogger Motor
(B793)
 Jogger HP sensor does not turn off
after the jogger fences have moved
from its home position.
 Jogger HP sensor does not turn on
after the jogger fences have
returned to its home position.
R7-R11