Service Mode Table
G133 5-12 SM
(Tray Location, Paper Type, Color Mode), Paper Type -> Plain, Thick 1or Thick
2
Adjusts the leading edge registration by changing the registration clutch
operation timing for each mode.
001 Tray: Plain *ENG
002 Tray: Thick 1 *ENG
003 Tray: Thick 2 *ENG
004 By-pass Table: Plain *ENG
005 By-pass Table: Thick 1 *ENG
006 By-pass Table: Thick 2 *ENG
007 Duplex: Plain *ENG
008 Duplex: Thick 1 *ENG
009 Tray: Thin *ENG
010 Tray: Middle Thick *ENG
011 By-pass: Thin *ENG
012 By-pass: Middle Thick *ENG
013 By-pass: Thick 3 *ENG
014 Duplex: Thin *ENG
015 Duplex: Middle Thick *ENG
[–9 to 9 / 0.0 / 0.1 mm/step]
[Side to Side Reg.] Side-to-Side Registration Adjustment
1002
Adjusts the side-to-side registration by changing the laser main scan start
position for each mode.
001 By-pass Table *ENG
002 Paper Tray 1 *ENG
[–4 to 4 / 0.0 / 0.1 mm/step]
To Next Page
Loading...
