Ricoh G133 - Page 450

Service Mode Table
G133 5-128 SM
015
Paper Transfer: FINE: 1st Side:
S4
*ENG
016
Paper Transfer: FINE: 2nd
Side: S4
*ENG
[100 to 600 / 140 / 5%/step]
210 mm ≥ S4 size ≥ 148 mm
(Paper width)
017
Paper Transfer: Plain: 1st Side:
S5
*ENG
[100 to 600 / 180 / 5%/step]
148 mm ≥ S5 size (Paper width)
018
Paper Transfer: Plain: 2nd
Side: S5
*ENG
[100 to 600 / 240 / 5%/step]
148 mm ≥ S5 size (Paper width)
019
Paper Transfer: FINE: 1st Side:
S5
*ENG
020
Paper Transfer: FINE: 2nd
Side: S5
*ENG
[100 to 600 / 150 / 5%/step]
148 mm ≥ S5 size (Paper width)
[Special 1: Leading Edge Correction] Special 1 Paper: Leading Edge
Correction
2771
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2753 and SP2757 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
 The paper leading edge area can be adjusted with SP2772.
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Paper Transfer: Plain: 2nd Side *ENG
[0 to 400 / 150 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
2771
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2751 is multiplied by these SP values.
 The paper leading edge area can be adjusted with SP2772.
005 Separation DC: Plain: 1st Page *ENG
[0 to 400 / 100 / 5%/step]