Service Mode Table
G133 5-136 SM
S5 148 mm ≥ S5 size (Paper
width)
018
Paper Transfer: Plain: 2nd Side:
S5
*ENG
[100 to 600 / 240 / 5%/step]
148 mm ≥ S5 size (Paper
width)
019
Paper Transfer: FINE: 1st Side:
S5
*ENG
020
Paper Transfer: FINE: 2nd Side:
S5
*ENG
[100 to 600 / 150 / 5%/step]
148 mm ≥ S5 size (Paper
width)
[Special 2: Leading Edge Correction] Special 2 Paper: Leading Edge
Correction
2821
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2803 and SP2807 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
The paper leading edge area can be adjusted with SP2822.
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Paper Transfer: Plain: 2nd Side *ENG
[0 to 400 / 150 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
2821
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2801 is multiplied by these SP values.
The paper leading edge area can be adjusted with SP2822.
005 Separation DC: Plain: 1st Page *ENG
006 Separation DC: Plain: 2nd Page *ENG
[0 to 400 / 100 / 5%/step]
007 Separation DC: Fine: 1st Page *ENG
[0 to 400 / 100 / 5%/step]
To Next Page
Loading...
