Ricoh G133 - Page 503

Service Mode Table
SM 5-181 G133
Service
Tables
012
K2: Lower Limit
Correction
*ENG
[–0.2 to 0.4 / –0.07 / 0.01 /step]
013 Diffusion Correction: M *ENG
014 Diffusion Correction: C *ENG
015 Diffusion Correction: Y *ENG
[0.75 to 1.35 / 1 / 0.01 /step]
016 K2: Check: M *ENG
017 K2: Check: C *ENG
018 K2: Check: Y *ENG
[0 to 1 / 0.25 / 0.001 /step]
3363 [ID Pattern Timing Setting] DFU
001 Scan YCMBk *ENG
Adjusts the detection timing for the
process control pattern.
[-500 to 500 / 13.7 / 1 mm/step]
002
Paper Transfer Release
Start Time
*ENG
Adjusts the timing when the paper
transfer unit is kept away from the image
transfer belt.
[0 to 2500 / 0 / 1 msec/step]
003 Delay Time *ENG
Adjusts the processing timing for the
process control pattern.
[0 to 2500 / 880 / 1 msec/step]
004 MUSIC Delay Time *ENG
Adjusts the processing timing for the
pattern that is used for the line position
adjustment.
[-2500 to 2500 / 300 / 1 msec/step]
3371 [M/A Calculation] DFU
001 Correction Coefficient: Bk *ENG
[0.5 to 2.0 / 1.04 / 0.01 /step]
002 Correction Coefficient: M *ENG
[0.5 to 2.0 / 0.98 / 0.01 /step]