Service Mode Table
G133 5-278 SM
When the print job is started from a network application (Desk Top Binder, Web Image
Monitor, etc.) the L: counter increments.
T:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
8 061
These SPs total the finishing methods. The finishing method is specified by
the application.
P:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
8 064
These SPs total finishing methods for print jobs only. The finishing method
is specified by the application.
O:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
8 067
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
8 06x 1 Sort
Number of jobs started in Sort mode. When a stored copy job is
set for Sort and then stored on the document server, the L:
counter increments. (See SP8 066 1)
8 06x 2 Stack Number of jobs started out of Sort mode.
8 06x 3 Staple Number of jobs started in Staple mode.
8 06x 4 Booklet
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
8 06x 5 Z-Fold
Number of jobs started In any mode other than the Booklet mode
and set for folding (Z-fold).
8 06x 6 Punch
Number of jobs started in Punch mode. When Punch is set for a
print job, the P: counter increments. (See SP8 064 6.)
8 06x 7 Other Reserved. Not used.
8 071 T:Jobs/PGS *CTL
[0 to 9999999/ 0 / 1]
To Next Page
Loading...
