Overview
G133 6-4 SM
tray).
8. By-pass feed clutch:
Turns on/off the drive power to the by-pass pick-up, feed
and separation rollers.
9. Registration motor: Drives the registration roller.
10. By-pass/duplex feed
motor:
Drives the by-pass pick-up, feed and separation roller,
and duplex transport rollers.
11. Paper transfer contact
motor:
Moves the paper transfer roller in contact with the image
transfer belt.
12. ITB drive motor: Drives the image transfer belt unit.
13. Duplex inverter motor
Drives the duplex inverter rollers and duplex transport
rollers.
14. Fusing/paper exit motor: Drives the fusing unit and paper exit section.
15. Junction gate 1 motor: Opens and closes junction gate 1.
To Next Page
Loading...
