• You can select only [Gray Scale], [Full Color: Text / Photo], or [Full Color: Glossy Photo]
when [PDF (JPEG 2000)] is specified in [File Type].
page 127 "Specifying the File Type or File Name When Scanning a Document"
• If you select the original type not compatible with the file format specified in [File Type], a
message suggesting you to change the file type or original type is displayed. In this case,
select a file type or original type from those suggested in the message.
When adjusting the density
• Move to the left or right to adjust the density. The colors in the scanned image
darken as you move the slider to the right.
• Select the [Auto Density] check box to adjust the density automatically when scanning an
original with a non-white background such as newspaper or a document that has show-
through.
• You can specify the shading level in [Scanner Settings] [Scan] [Color/Density]
[Background Density of ADS (Full Color)].
When specifying the resolution
• Select the resolution to use for scanning the original. Image quality improves as the
resolution increases, but the size of the scanned data also increases.
• To ensure the quality of scanned data, [150 dpi] cannot be selected in the following
cases:
• [PDF (JPEG 2000)] is specified in [File Type]
page 127 "Specifying the File Type or File Name When Scanning a Document"
• PDF is selected in [File Type] and OCR setting is specified
See "Scanning an Original as a PDF File with Embedded Text Data", User Guide
(Full Version).
3. To send the scanned document to an e-mail address, press [Sender] and then specify the
sender.
4. Specify the destination on the scanner screen.
5. Place the original. If scanning does not start automatically, press [Start].
page 54 "Placing Originals on the Original Table"
Scanning an Original with Suitable Quality and Density
125
To Next Page
Loading...
