Message Cause Solution and reference
"You do not have a
privilege to use this
function. This job has
been cancelled."
Authentication
information is not
registered correctly
in the printer driver.
Specify the authentication information in the printer
driver. For the authentication information, consult the
user administrator.
See "Specifying Login Information in the Printer Driver",
User Guide (Full Version).
The user registered
in the printer driver
does not have
permission to use
the printer function.
Consult the user administrator. The user administrator
can change the access permissions in the address book.
See "Confirming the Available Functions", User Guide
(Full Version).
Messages that Appear with Error Codes
Check the system configuration list or print settings list. The details of the error may also be printed in the
list.
See "List/Test Print", User Guide (Full Version).
See "Printing the Print Settings List", User Guide (Full Version).
Message Cause Solution and reference
"84: Error" The amount of available
work area is insufficient for
processing images.
Reduce the transmission data.
"86: Error" The parameter in the control
code is incorrect.
Specify the correct parameter.
"92: The print job was
cancelled."
(displayed in the error
history)
Printing is canceled from the
control panel.
To perform printing, operate the control
panel again.
"98: Error" Accessing the hard disk
failed.
Turn off the power of the machine, wait for
10 seconds or more after confirming that
the main power indicator is turned off, and
then turn on the power.
page 11 "Turning On and Off the Power"
When a Message Appears While Using the Printer Function
219
To Next Page
Loading...
